Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - pzanna

Pages: 1 [2] 3 4 ... 21
16
Zodiac GX Firmware / Re: .bin file development
« on: September 24, 2018, 04:06:35 PM »
Hi Kursat,

The CPU in the Zodiac GX is a MT7621A. Unfortunately, it doesn't have a usable JTAG connector so you can't use a hardware debugger like the Zodiac FX but it does run Linux so all the standard Linux debugging tools are available.

Regards,
Paul

17
Hi,

Can you please turn on debugging via the serial console (trace command in the debug context) to see if that provides any additional information.

Regards,
Paul

18
Zodiac GX General / Firmware Update: v1.10
« on: September 11, 2018, 11:40:58 AM »
A new version (v1.10) of the Zodiac GX firmware is now available for download.

Zodiac_GX_v1_10_20180908_2.bin

Zodiac GX source code on GitHub

The following changes are included in this update:

Added: Updated OpenWRT build to v18.06.1 (Linux kernel 4.14.63).
Added: Updated Open vSwitch to v2.10.0.

Please post issues or questions related to this update within this thread.

Regards,
Paul

19
Zodiac GX General / Re: Meter Support for the GX
« on: September 08, 2018, 04:51:57 PM »
The current GX firmware (v1.01) is based on OVS 2.5 which doesn't support meters in the kernel module. The next firmware release (v1.10) which is using OVS 2.10.0 does support meters and should be available in the next couple of days if all goes well with testing.

Regards,
Paul   

20
Zodiac GX General / Firmware Update: v1.01
« on: August 26, 2018, 03:21:25 PM »
A new version (v1.01) of the Zodiac GX firmware is now available for download.

Zodiac_GX_v1_01_20180825_1.bin

Zodiac GX source code on GitHub

The following changes are included in this update:

Fixed: OVS was reporting the incorrect port speed to OpenFlow controllers.
Added: Support for SSL OpenFlow controller connections.

Please post issues or questions related to this update within this thread.

Regards,
Paul

21
Zodiac GX General / Latest versions of source code and firmware.
« on: August 26, 2018, 08:34:57 AM »
Firmware: Zodiac_GX_v1_10_20180908_2
MD5: 31f17dc16a8bb04c8df63d141b34324b
SHA256: d816448c211b45877e06182c7e02217618b7728b819ad363f57eb8df61aabc86

Release Notes: Firmware update v1.10

Source Code: Zodiac GX on Github

Knowledge Base: Zodiac GX Knowledge base

22
Zodiac FX General / Re: Default action in OpenFlow 1.3
« on: July 17, 2018, 06:35:25 AM »
The default action for non-matching packets is different based on the OpenFlow version. In the OpenFlow 1.0 specification it states "If no matching entry can be found for a packet, the packet is sent to the controller over the secure channel.", however in the OpenFlow 1.3 spec it is "If the table-miss flow entry does not exist, by default packets unmatched by flow entries are dropped". A table-miss entry is basically a match everything flow and a lot of OpenFlow applications will use this to sent unknown packets to the controller, similar to what 1.0 would do by default.

Regards,
Paul 

23
Zodiac WX Development / Re: Kernel upgrade/downgrade
« on: June 29, 2018, 11:10:53 AM »
Hi Omar,

The controller IP address and port can change to whatever you like by going to System->Starup and modifying the settings in the startup script, there are more details here. The controller also runs in-band so it can be anywhere that has IP connectivity from the WX.

If the controller is not running any applications that will install the required flows you will lose connectivity on the LAN port and for the wireless clients because there are no flows to allow the traffic. It is set to "fail stand-alone" mode by default so if you stop the controller it will allow traffic again.

Regards,
Paul

24
FlowMaker General / Re: Where and how to install flowmaker
« on: June 29, 2018, 11:02:01 AM »
Hi Rahim,

We have stopped providing Flow Maker as it no longer works with the Aruba controller since they updated it. I would recommend trying FlowManager for the RYU controller as it provides a similar functionality.

Regards,
Paul

25
Zodiac WX General / Firmware update v1.20
« on: June 23, 2018, 08:35:12 AM »
A new version (v1.20) of the Zodiac WX firmware is now available for download.

v1.20 Build 20180621_5

The following changes are included in this update:

The Zodiac WX OpenFlow functions have now been replaced by Open vSwitch. The main reason for the change was to allow the maximum stability and compatibility with OpenFlow controllers.

The OpenFlow configuration settings are now in the rc.local start script which you can find in System->Startup menu. The only updates you should have to make are for your OpenFlow controller IP address and port. Remember to save & apply the settings and then restart. If you make a change that causes a configuration issue and can no longer connect to the device, press and hold the reset button underneath the device for 20 seconds and then release and it will restart.

NOTE: As the OVS config runs as the last part of the boot process any changes made to the running network config will not apply until a restart. So, for example, if you change the LAN IP address you will lose connectivity and need to restart. This happens because when OpenWRT reconfigures the interface and in doing so removes it from the OVS bridge which makes it unusable until the startup script runs and it is added back again. I'm currently looking into ways to make this more seamless, hopefully using NETIFD.

Also, please note that as this is a significant change to the settings you MUST reset them (uncheck keep settings) during the upgrade to ensure you have a default configuration.

Please post issues or questions related to this update within this thread.

Regards,
Paul

26
Hi James,

The Faucet and Zodiac FX configurations are entirely independent of each other, just as they would be for any OpenFlow device that you use with Faucet. You can always name things the same to keep track of them, but none of it will carry over to the other.

Regards,
Paul

27
Hi,

What information was it you were expecting to be updated on the Zodiac FX by Faucet?

Regards,
Paul

28
Zodiac FX General / Re: Group table
« on: June 07, 2018, 01:11:04 PM »
Hi Sebastian,

How are you adding the groups and what are the actions you are using?

Regards,
Paul

29
Hi Sebastian,

Can you please provide a little more on information on your setup and the problems you are having?

Regards,
Paul

30
Hi Talha,

Have you set "Hybrid" to FALSE in the settings? Otherwise, it won't create the flows to send packets to the controller so it can see the clients.

Regards,
Paul

Pages: 1 [2] 3 4 ... 21